Navigation Systems

Trolling Motor Mount - 4/8-PinEasily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.WARNING: This product can expose you to chemicals which are...

Replacement Fairing Block f/GT21, GT23, GT41, GT50 & GT51 Series of Thru-Hull Scanning TransducersUse our fairing block to position your Garmin GT21, GT23, GT41, GT50 or GT51 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise...

GNX™ Wireless Sail Pack 43The Sail Pack You Need with 43 mm Transducers Includes Garmin GNX™ Wind and GNX 20 marine instruments, gWind™ Wireless 2 transducer, plus GDT 43 and GST 43 with 43 mm fittings and adapters for NMEA 2000® network sharing GNX...

Power/Data Cable f/AIS 600Use this power/data cable to power the AIS 600. Includes NMEA 0183 inputs/outputs.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

GTEMP10-TH Thru-Hull Temp SensorThe Easy Way to Know Accurate Water TemperaturesKnow the accurate temperature in your baitwell, livewell and the waters you are fishingHigh-sensitivity, fast response temperature sensing (-13 to 140 degrees F)Ability to name devices, such as "livewell port" and "baitwell starboard," in...

Kayak In-Hull Transducer MountGarmin's versatile in-hull transducer mounting solution for kayaks allows fishermen to get out on the water with their favorite Garmin equipment.The mount fits the Garmin dual beam transducer (77/200 kHz) and GT20-TM transducer (77/200 kHz/DownVü), and is for use with compatible...

Portable Kit for STRIKER™Garmin's portable kit protects and carries your STRIKER fishfinder with GPS, so it's perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.STRIKER™...

User Data Sharing CableShare user data such as waypoints and routes with other compatible Garmin devices.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

microSD™ Card Door for echoMAP™ CHIRP 9XsvGarmin's replacement microSD™ door keeps your compatible marine device at sea by securing and protecting your memory card.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...

microSD™ Card Door for echoMAP™ CHIRP 7Xdv/7XsvGarmin's replacement microSD door keeps your compatible marine device at sea by securing and protecting your memory card.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...

Trim Piece Snap Cover for echoMAP™ CHIRP 9XsvDon't let misplaced or broken trim blemish the beauty of your Garmin device. Use this trim piece snap cover and mount your compatible echoMAP™ CHIRP device.WARNING: This product can expose you to chemicals which are known to...

Barrel Mount for Panoptix™ PS21Replacement trolling motor barrel mount for the Panoptix PS21 LiveVü Forward transducer.Compatible Devices:Panoptix™ PS21WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more...

GT8HW-TM Plastic, TM or Trolling Motor Transducer, High Wide CHIRP - 150-240kHz, 250W, 8-PinGT8HW-TM transducer is perfect for shallow water fishermen who want clear bottom definition under the boat as well as crisp, clear and wide fish arches with excellent target separation. The wider...

Flush Mount Kit for STRIKER™ 7dv/7svEasily position your compatible device against most flat surfaces in your boat with this flush mount kit. It includes hardware, instructions and a template for sleek installation.WARNING: This product can expose you to chemicals which are known to the...

Flush Mount Kit for STRIKER™ 5dvEasily position your compatible device against most flat surfaces in your boat with this flush mount kit. It includes hardware, instructions and a template for sleek installation.WARNING: This product can expose you to chemicals which are known to the...

GNX™ KeypadControl a compatible GNX instrument display from a distance with this push-button keypad interface which can be fixed-mounted near the helm. It features 4 buttons dedicated to preset configurations. Plus, you can adjust the background lighting of all displays with the touch of...

Bail Mount with Knobs for GPSMAP 7x16Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other...

Adapter Cable To Connect GT30 T/M to P729/P79Connect a Garmin GT30 transom mount scanning transducer and an Airmar P72 or P79 in-hull mount traditional transducer to a compatible echoMAP™ chartplotter/sonar combo.This adapter cable allows the echoMAP to continue to display water depth from the...

Trolling Motor Adapter KitMount your Airmar TM150M transducer with CHIRP technology to your trolling motor with this adapter kit. Contents include two 3/4" pan head screws, a plastic trolling motor adapter ring, a plastic trolling motor adapter, a metal band clamp and instructions.Compatible Devices:...

7-Pin Power/Data Cable with 90° ConnectorConnect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features:90° connector for installation in tight spaces or flush mountingCompatible Devices: GHC™ 20 Marine Autopilot Control Unit GMI™ 20 Marine Instrument GNX™...