Marine Navigation & Instruments - Transducers

GT51M-TH - Stainless Steel Thru-Hull DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)Perfect for the coastal and offshore fisherman who want CHIRP traditional sonar, CHIRP ClearVü and CHIRP SideVü scanning sonar with a stainless steel...

Transom Mount DownVü 500W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer w/Temp - 4-PinGet ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer.This 20 ft transducer cable with built-in fast response temperature sensor...

Transom Mount Depth/Temp 50/200kHz - 8-PinThis plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units.The 500 W 8-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth...

GT15M-THF 20 Degree 600W SS Thru-Hull TransducerDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.Midband Chirp Traditional SonarThis 8-pin, 600-watt stainless...

GT8HW-IH In-Hull Transducer - 8-PinGT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section in the hull to be mounted and is...

GT20-TM Transom Mount DownVü 500W (CHIRP 455/800kHz); Traditional 500W (77/200kHz) Transducer w/Temp - 8-PinGet ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 8-pin transducer.This 20 ft transducer cable with built-in fast response temperature sensor has a...

GT21-THPerfect for coastal and offshore fishermen who want traditional sonar and CHIRP ClearVü scanning sonar with a stainless steel stem, this thru-hull mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the...

SS60 0° Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-PinThis stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50...

GT10HN-IF Ice Fishing TransducerThe GT10HN-IF ice fishing transducer is perfect for fishermen who want clear definition under the ice with excellent target separation. The narrow, 7-16 degree beam angle provides precise fish and jig detection. The 8-pin transducer features high-narrow CHIRP traditional sonar and...

Airmar B75Mw/0° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26....

Panoptix™ LVS32-TH Transducer Thru-Hull MountThis transducer is part of the Panoptix LiveScope System and requires the GLS 10 sonar black box to function. You get both LiveScope™ Down and LiveScope™ Forward modes in one transducer. It’s easy to adjust the transducer mode to fit...

Airmar B175Mw/0° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum...

SS60 12° Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pinhis stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50...

Airmar R109LM Thru-Hull Transducer - Bare WiresRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000M (10,000’) with 5 to...

Airmar B75Hw/12° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls.Max Depth - 800'Suppoarted...

GTEMP10-TH Thru-Hull Temp SensorThe Easy Way to Know Accurate Water TemperaturesKnow the accurate temperature in your baitwell, livewell and the waters you are fishingHigh-sensitivity, fast response temperature sensing (-13 to 140 degrees F)Ability to name devices, such as "livewell port" and "baitwell starboard," in...

Tilted Element™ Thru-HullMinimize Your DragThe B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of...

Airmar B175Hw/0° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum...

B258 1kW Bronze Thru-Hull Depth/Temp w/FB - 8-PinGarmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-25° deadrise angle.WARNING: This product can expose you to chemicals...

TM260 1kW Plastic TM Depth/Temp - 8-PinGarmin's plastic transom mount transducer provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 3-21° transom angle.WARNING: This product can expose you to chemicals which are known...