Products

Harness (12-Pin) for Garmin OnBoard SystemUse this to replace the power cable and 12-pin engine harness on your GOS 10 Hub for the Garmin OnBoard System.What's In The Box? 12-pin fused power and engine cut-off harness with external buzzer for the Garmin OnBoard System...

HDMI Cable f/GPSMAP 8400/8600Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter’s screen. The...

Heavy Duty Transducer Extension Cable - 10' - 8-PinExtend the length of a compatible 8-pin transducer with this 10-foot cable. Specifications: Type: Extension Box Dimensions: 1"H x 9"W x 10"L WT: 0.7 lbs UPC: 753759321109

Heavy Duty Transducer Extension Cable - 30' - 8-PinExtend the length of a compatible 8-pin transducer with this 30-foot cable. Specifications: Type: Extension Box Dimensions: 3"H x 10"W x 10"L WT: 1.6 lbs UPC: 753759321116

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the...

High-Speed HDMI CableUse this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.

inReach® 3 Dive CaseUse this water-resistant case to bring your inReach® Mini 3 satellite communicator on your dives and have peace of mind whenever you surface (GPS tracking and satellite communication do not work underwater). Withstands pressures equivalent to a depth of 10 ATM...

inReach® Flotation LanyardKeep your device secure and close-at-hand on the water with this neoprene flotation lanyard, featuring a quick-release connector.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm....

Intelliducer, NMEA 2000, Thru-Hull0-12° deadriseAdd sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 0-12° deadrise angle. WARNING: This product can expose you...

Intelliducer, Thru-Hull, NMEA 200013-24° DeadriseAdd sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 13-24° deadrise angle. WARNING: This product can expose you...

Interconnect Cable (Hydraulic) - 5mUse this 5 meter cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to ECU (electronic control unit). Includes bare wire connections for buzzer and optional Shadow Drive valve. ECU connector includes quarter turn collar for compatibility with...

Interconnect Cable (Mechanical/Hydraulic w/SmartPump)Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer unit) to ECU (electronic control unit). Includes bare wire connections for alarm and optional Shadow Drive valve. ECU connector includes threaded collar for compatibility with ECU...

Interconnect Cable (Steer-by-Wire)Use this 3 meter interconnect cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to a steer-by-wire controller. Includes bare wire connections for buzzer.WARNING: This product can expose you to chemicals which are known to the State of California to...

J1939 Cable for GPSMAP® Units - 10mConnect your GPSMAP® 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA 2000® network, the J1939 network follows a standard and uses proprietary messages.WARNING:...

Jack Plate MountEasily attach your compatible 4-, 8- or 12-pin scanning transducer to the jack plate of your boat with this mount, which provides excellent sonar returns at low speeds. The mount protects the transducer from underwater obstructions and creates no drag on the...

Kayak In-Hull Transducer MountGarmin's versatile in-hull transducer mounting solution for kayaks allows fishermen to get out on the water with their favorite Garmin equipment.The mount fits the Garmin dual beam transducer (77/200 kHz) and GT20-TM transducer (77/200 kHz/DownVü), and is for use with compatible...

LakeVü™ g3 - LUS100F - microSD™/SD™The Advanced Freshwater Fishing Map                              Industry-leading coverage, clarity and detail with updated inland maps that feature integrated Garmin and Navionics® content Coverage for more than...

LakeVü g3 Ultra U.S. - EastThe Premier Freshwater Fishing MapProvides industry-leading coverage, clarity and detail for more than 17,000 lakes with 1’ contours that feature integrated Garmin and Navionics® data Auto Guidance¹ technology uses your desired depth and overhead clearance to calculate routes and...

LakeVü g3 Ultra U.S. - WestThe Premier Freshwater Fishing Map Provides industry-leading coverage, clarity and detail for more than 17,000 lakes with 1’ contours that feature integrated Garmin and Navionics® data Auto Guidance¹ technology uses your desired depth and overhead clearance to calculate routes...

Large Nose Cone - GT56 Transducer CompatibleReplace the standard part of your compatible trolling motors or use the nose cone to install a compatible Garmin GT56 model transducer. If you’re rerouting a new transducer through the trolling motor shaft, the transducer replacement kit is...